Gas-powered tankless water heater IWH-1.5E, 724,05 €

Hot water boiler with instantaneous water heater principle.
Highly efficient copper heat exchanger with up to 92% efficiency.
Low exhaust gas temperatures of approx. 90°C.
Burner output 10 KW.
Up to 60% less gas consumption than devices with storage tanks, as constant reheating is not necessary. This means that there is absolute peace and quiet even at night.
The device is started and stopped automatically by opening a water tap using a flow meter.
Continuous selection of the water temperature (35 - 60°C) on the control panel. The burner output is continuously regulated via a modulation valve with processor control.
Minimal calcification due to low heat exchanger temperature and elimination of unnecessary reheating.
No corrosion, bacteria or legionella problems.
Low weight as there is no tank.
Highly efficient, brushless exhaust fan motor.
Option to heat the fresh water tank in winter.
High level of safety and ease of maintenance thanks to external service door.
Service door can be painted.
CE approval / Australian Watermark certification

Technical data

Specification	Details
Maximum burner output	10 kW
Minimum burner output	3.3 kW
Gas consumption at full load	765 g/h
Gas pressure	30 mbar
Gas type	propane G31, butane G30
Water temperature	35 – 60°C, digitally adjustable
Max. control time	<60 sec, typically 10 sec
Typical flow rate	5 l/min
Temperature increase at 3.3 L/min	37.7 °C
Efficiency	up to 92%
Typical exhaust gas temperature	90°C
Maximum water pressure	5.0 bar
Supply voltage	10.5 – 15V DC
Current consumption at 12V	0.44 A
Electrical power consumption during operation	5.28 W
Size	320 x 320 x 320 mm
Weight	12.1 kg

Item weight:	12,10 kg