Boiler configurator - Pundmann Therm Boiler 230V / 500W, 9L

boilerCONTROL is a simple and convenient way to heat water in a boiler, providing full control from a smartphone and local buttons.

The device allows you to turn the boiler on and off, set heating parameters such as heating mode, heating time
and temperature limit for Pundmann boilers.

Thanks to local configuration via a browser, it is possible to remotely manage the device,
as well as integrate it with other systems using a router with a VPN function and activate boiler heating with excess battery power.

boilerCONTROL is a simple and convenient way to heat water in the boiler, providing full control via smartphone and local buttons.
The device allows switching the boiler on and off, setting heating parameters such as heating mode, heating duration, and temperature limit for Pundmann boilers.
In daily use, an LED-illuminated button ring enables the selection of either the 12V/24V or 230V heating element.
Through local configuration via a browser, remote management of the device is possible, as well as integration with other systems through a VPN-enabled router and activation of boiler heating in case of battery surplus.

boilerCONTROL is a simple and convenient way to heat water in a boiler, providing full control from a smartphone and local buttons.

The device allows you to turn the boiler on and off, set heating parameters such as heating mode, heating time
and temperature limit for Pundmann boilers.

Using additional control buttons, you can start the heaters or the Autoterm Air system, which is used to heat water.In everyday use, the button illuminated with an LED ring allows you to select a 12V/24V or 230V heater.All buttons operate potential-free, which ensures safety and versatility of integration with other systems.Thanks to local configuration via a browser, it is possible to remotely manage the device,
as well as its integration with other systems using a router with a VPN function and activate boiler heating with excess battery Energy.

boilerCONTROL is a simple and convenient way to heat your boiler, providing full control via smartphone and local buttons. The device allows switching the boiler on and off, as well as setting heating parameters such as heating mode, heating duration, and temperature limit for Pundmann boilers.

With additional control buttons, heating elements can be activated, or an Autoterm Air system can be started to heat the water. In daily use, the user can select between the 12V/24V and 230V heating elements with an LED-illuminated built-in button. Alternatively, a third button is available to activate the parking heater. All buttons switch potential-free, ensuring safety and versatile integration with other systems.

Through local configuration via a browser, remote management of the device is possible, as well as integration into other systems via a router with VPN functionality and the activation of boiler heating in case of battery surplus.

The option to embed a temperature sensor in the boiler through an additional hole of FI 6 mm, into which you can insert a temperature probe with a maximum diameter of 5 mm, allows you to know the current water temperature.

There is no specially prepared opening for mounting a temperature sensor in the boiler.

The NTC 5K 3985K temperature sensor is a widely used sensor for temperature measurement in various applications where reliability and measurement accuracy are important.
With its resistance value of 5K at the reference temperature (usually 25°C), the sensor provides accurate measurements over a wide temperature range. The value 3985K indicates the temperature at which the resistance of the thermistor is 3985 ohms, allowing for precise scaling of measurements depending on temperature.
The 5-meter long cable made of PVC (Polyvinyl Chloride) provides flexibility and durability, enabling easy installation and use of the sensor in various environmental conditions.
Overall, the NTC 5K 3985K PVC 5m sensor is a reliable and accurate tool for monitoring temperature in various applications, ensuring high quality and measurement reliability.

SPECIFICATION

• Measurement range: from -4°C to 105°C
• B coefficient: 3470, 5k Ω at 25°C
• Probe dimensions: 5mm thick, 50mm long
• Cable length: 2m

The DS18B20 temperature sensor is a popular digital temperature sensor that can be used for temperature measurement in various applications. It features a 1-Wire interface, enabling communication with multiple sensors using just one microcontroller pin. The version with a 5-meter cable is useful when the sensor needs to be placed in a remote location from the controller, allowing for flexible installation solutions. The DS18B20 is widely used in projects related to temperature monitoring, climate control, home automation, and other applications where precise temperature measurement is essential.

Installing the boiler using a quick connector is a lightning-fast and hassle-free connection that requires no tools. This process saves you time and avoids the risk of errors during installation.

A 3/8 inch diameter connector is commonly used in water installation systems.