The Autoterm 2D 12V heater can simply be kept running with a clear conscience. Especially when ambient temperatures are extremely low or the walls of the camper/cabin are not well insulated, a huge amount of energy is required to heat the living space. It is better not to let the room cool down completely and just keep the heating on low. You can always turn it up - and you should do this from time to time so that the heating doesn't get dirty! As a rule of thumb: at least every 1 - 2 weeks, set the heater to full power for half an hour! Autoterm has been a proven technology for many years and even under the former name of Planar it was impossible to imagine self-service motorhomes without it. The Autoterm 2D parking heater runs on a fuel such as diesel and is fully automatic. The heater has a built-in DC motor, which is used to ensure smooth starting and economical operation. The heater is also equipped with a fuel control system to effectively manage fuel consumption and minimise running costs.
Durable and easy to operate
The heaters are extremely robust and reliable. What's more, they can even be repaired without too much trouble while travelling the world, should this actually be necessary. However, if care is taken to ensure that the heater does not soot itself by operating it only on the lowest setting, this is not to be expected. It is important to ensure that it is serviced and maintained regularly to maintain its efficient operation and ensure a long service life
Control panels (kit does not include a control panel)
Autoterm heaters can be controlled by a variety of control panels. Please select the desired control panel when ordering.
PU-28: the PU-28 Autoterm control panel allows the user to easily control and monitor the operation of the parking heater, set the start-up time and set the air temperature in the vehicle cabin. The PU-28 Autoterm panel is equipped with an LCD screen that displays information on the heater's operating status, time settings and temperature. The panel also has an automatic heating shutdown function in the event of a system failure.
PU-5: A simple control panel with rotary control. It controls the heater through power levels. A temperature sensor (to be ordered separately) can be connected, in which case control via room temperature is possible with the PU-5.
PU-27: The digital control panel with OLED display has an integrated temperature sensor (cable length 1.8 m), but an external temperature sensor can also be connected if the control panel is mounted in an unsuitable location (e.g. in a cupboard). Control via a fixed power level is also possible. The unit has a timer function.
Comfort Control: New, improved control panel for Autoterm parking heaters. With three freely adjustable timers for any day of the week, extended heating modes (including thermostat mode), voltage monitoring and many other functions. Multifunction dial with pleasant-to-touch rubber coating and OLED display.Convenient use, elegant design.
Set includes
- Autoterm "Extra Quiet" fuel pump
- Autoterm AIR 2D-12V Parking air heater 2kW
- Angle side entry FI 24 mm
- Flat mounting plate (2kW / 4kW)
- Stainless steel exhaust silencer (17 x 9 x 5 cm)
- Rubber handle for metering pump
- Wiring harness for metering pump
- Heater wiring harness
- Intake air hose with integrated silencer
- Exhaust pipe end + clamp
- Tank inlet pipe
- 5.5 m fuel line
- Fuel line connector
- Corrugated sheet metal exhaust pipe 1 m long
- Bolts, nuts, clamps, heat shrink tubing, hose clamps
- Hose coupling PG 1/2 x 10mm
- Operating instructions
T-piece for fuel supply
T-piece (8 x 8 x 5.3mm), where an auxiliary heater is already in place or the proper functioning of both the heater and the vehicle is ensured, if the original vehicle fuel system is used for fuel supply via the T-piece.
Fuel filter
Fuel filter so that the heater always receives clean fuel. In the case of fuel from obscure countries or vehicles with rusty tanks, this is life insurance for the heater's fuel pump. Note: Do not install the filter horizontally, but at a slight angle so that the pump always sucks from the filled side of the filter!
Note
A fuel hose is included in the scope of delivery, with which the hoses can be connected. The length is usually sufficient (divide the pieces if necessary).
AUTOTERM Air 2D | |
Technical characteristics | |
Voltage | |
Heating medium | |
Heating power | |
Volume of heated air | |
Energy consumption | |
Max. working altitude (above sea level) | 1600 m (standard control unit) / 2500 m (high-altitude control unit) |
|
Fuel | |
Fuel consumption | |
Control mode | Handheld, standard remote control, modem |
|
Compatible control panels | PU-5, PU-10, PU-22, PU-27, PU-28, Comfort Control |
|
Weight of the device | |
Weight of the kit | |
Dimensions of the device | |
Package dimensions | |